Model |
FT-252SC |
Knitting Width |
52〞(inches) |
Needle gauge |
5G 7G 10G 12G 14G 16G |
CAM system: |
CAM system is developed for knitting or transfer, tuck ,no-knitting, simultaneously, transfer as front-rear, rear-front for both directions of carrage movement. |
Knitting speed |
Max speed 1.2 M/S or depends on the setting and condition of needle gauge and knitwear. |
Color |
4 double-sides guild rails and 16 yarn carriers controlled by shifting electromagnet and be switched on or parked according to the setting of width of knitting. |
Needle selection device |
Needle selected by 8 sections electromagnet. |
Take-down comb |
System run automatically and under monitoring. |
Clip cutters |
Two pairs of Clip cutter on both left and right side. |
Needle Bed |
Precise-pressed, plug pin ,single needle, single pin assembled needle bed. |
Sinker |
Sinker is lasting open to conduct better pressing ring. |
Yarn feeding wheel |
Yarn feeding wheel on each side of the machine |
Stitch tension |
Controlled by stepping motor with 32 sections adjustable. |
Racking |
Moving scope within 2 inches |
Take-down |
32 sections with various speed. |
Automatic self-stop device |
The machine can perform alarm and self stop to protect machine in case of yarn breaking,knots, floating, needle breaking or clash, yarn rewind, end of knitting, fail of racking, error programming occur. |
Driver |
Driving by AC servo motor and pulley system, trace of carriage be adjusted automaticcly subject to width of knitwear. |
Operation indicator |
(light)green: normal running; Yellow: standby; Red: abnormal shutdown |
Data put-in |
Put in by touch screen or USB disk. |
Operation sccreen display |
12.1 LCD touch-screen, English and Chinese interface |
Power |
AC 220V, Single-phase, 50/60 HZ (1.5KVA) |
L*Wi*H/Net Weight |
2920﹡900﹡1800mm∕1280kg |
